3d-printing-of-biomolecular-models-for-research-and-pedagogy

3D Printing of Biomolecular Models for Research and Pedagogy

The construction of physical three-dimensional (3D) models of biomolecules can uniquely contribute to the study of the structure-function relationship. 3D ...

A void network model, named Pore-Cor, has been used to study the permeation of an ink solvent into paper coating formulations coated onto a synthetic substrate. The network model generated anisotropic void networks of rectangular cross-sectional pores connected by elliptical cross-sectional throats. These structures had porosities and mercury intrusion properties which closely matched those of the experimental samples. The permeation of hexadecane, used as an analogue for the experimental test oil, was then simulated through these void structures. The simulations were compared to measurements of the permeation of mineral oil into four types of paper coating formulation. The simulations showed that the inertia of the fluid as it enters void features causes a considerable change in wetting over a few milliseconds, a timescale relevant to printing in a modern press. They also showed that in the more anisotropic samples, fast advance wetting occurred through narrow void features. It was found that the match between experimental and simulated wetting could be improved by correcting the simulation for the number of surface throats. The simulations showed a more realistic experimental trend, and much greater preferential flow, than the traditional Lucas-Washburn and effective hydraulic radius approaches.

Influence of anisotropy on the dynamic wetting and permeation of paper coatings.

The pervasiveness of the desire for beautiful lips persists today, with women in the United States spending almost 2.9 billion dollars annually on cosmetics and lip products. The lips occupy the central feature of the lower third of the face and are of paramount importance to facial beauty. Various surgical approaches and methods are used in lip augmentation.

Article	Year
Influence of anisotropy on the dynamic wetting and permeation of paper coatings. Journal of colloid and interface science\| PubMed ID: 15694438	2005
Temporalis fascia for lip augmentation. Annals of plastic surgery\| PubMed ID: 21042174	2011
Temporalis fascia for lip augmentation. Plastic and reconstructive surgery\| PubMed ID: 21617427	2011

Ian Roy

Biography

JoVE Journal Publications

Other Publications