demonstration-hyperlens-integrated-microscope-super-resolution

Demonstration of a Hyperlens-integrated Microscope and Super-resolution Imaging

The use of super-resolution imaging to overcome the diffraction limit of conventional microscopy has attracted the interest of researchers in biology and ...

demonstration-equal-intensity-beam-generation-dielectric

Demonstration of Equal-Intensity Beam Generation by Dielectric Metasurfaces

The fabrication and characterization protocol for a metasurface beam splitter, enabling equal-intensity beam generation, is demonstrated. Hydrogenated ...

demonstration-spin-multiplexed-direction-multiplexed-all-dielectric

Demonstration of Spin-Multiplexed and Direction-Multiplexed All-Dielectric Visible Metaholograms

The optical holography technique realized by metasurfaces has emerged as a novel approach to projective volumetric display and information encryption ...

Measurement of bioluminescent or fluorescent optical reporters with an implanted fiber-optic probe is a promising approach to allow real-time monitoring of molecular and cellular processes in conscious behaving animals. Technically, this approach relies on sensitive light detection due to the relatively limited light signal and inherent light attenuation in scattering tissue. In this paper, we show that specific geometries of lensed fiber probes improve photon collection in turbid tissue such as brain. By employing Monte Carlo simulation and experimental measurement, we demonstrate that hemispherical- and axicon-shaped lensed fibers increase collection efficiency by up to 2-fold when compared with conventional bare fiber. Additionally we provide theoretical evidence that axicon lenses with specific angles improve photon collection over a wider axial range while conserving lateral collection when compared to hemispherical lensed fiber. These findings could guide the development of a minimally-invasive highly sensitive fiber optic-based light signal monitoring technique and may have broad implications such as fiber-based detection used in diffuse optical spectroscopy.

Lensed fiber-optic probe design for efficient photon collection in scattering media.

Overcoming the resolution limit of conventional optics is regarded as the most important issue in optical imaging science and technology. Although hyperlenses, super-resolution imaging devices based on highly anisotropic dispersion relations that allow the access of high-wavevector components, have recently achieved far-field sub-diffraction imaging in real-time, the previously demonstrated devices have suffered from the extreme difficulties of both the fabrication process and the non-artificial objects placement. This results in restrictions on the practical applications of the hyperlens devices. While implementing large-scale hyperlens arrays in conventional microscopy is desirable to solve such issues, it has not been feasible to fabricate such large-scale hyperlens array with the previously used nanofabrication methods. Here, we suggest a scalable and reliable fabrication process of a large-scale hyperlens device based on direct pattern transfer techniques. We fabricate a 5 cm × 5 cm size hyperlenses array and experimentally demonstrate that it can resolve sub-diffraction features down to 160 nm under 410 nm wavelength visible light. The array-based hyperlens device will provide a simple solution for much more practical far-field and real-time super-resolution imaging which can be widely used in optics, biology, medical science, nanotechnology and other closely related interdisciplinary fields.

Demonstration of nanoimprinted hyperlens array for high-throughput sub-diffraction imaging.

Conventional metamaterial absorbers have multilayer designs, where the dielectric interlayer is sandwiched between a top patterned metallic structure and bottom metallic film. Here, we demonstrate that a highly polarization-sensitive perfect absorber canbe realized by replacing the bottom metallic film with a plasmonic grating. Designs for broadband and narrowband of wavelength are proposed and numerically investigated. The designed absorbers perform high light absorption, which is above 90% over the wavelength range of 0.4-1.4 µm for the broadband absorber and 98% for the absorption peak in case of the narrowband design, with a specific polarization of incident light. We find that the absorption is tunable by changing the polarization. Such absorbers offer new approach for active control of light absorbance with strong impacts for solar energy harvesting, light emitting and sensing.

Control of light absorbance using plasmonic grating based perfect absorber at visible and near-infrared wavelengths.

This corrects the article DOI: 10.1038/srep46314.

ArticleTotal : 3	Year
Publication title Cited by 8	2017
Publication title Cited by 12	2019
Publication title Cited by 1	2020

Article	Year
Lensed fiber-optic probe design for efficient photon collection in scattering media. Biomedical optics express\| PubMed ID: 25657886	2015
Demonstration of nanoimprinted hyperlens array for high-throughput sub-diffraction imaging. Scientific reports\| PubMed ID: 28393906	2017
Control of light absorbance using plasmonic grating based perfect absorber at visible and near-infrared wavelengths. Scientific reports\| PubMed ID: 28572672	2017
Corrigendum: Demonstration of nanoimprinted hyperlens array for high-throughput sub-diffraction imaging. Scientific reports\| PubMed ID: 28836623	2017

Dasol Lee

Biography

JoVE Journal Publications

Other Publications