a-polymer-based-piezoelectric-vibration-energy-harvester-with-3d

A Polymer-based Piezoelectric Vibration Energy Harvester with a 3D Meshed-Core Structure

In this study, we fabricated a flexible 3D mesh structure with periodic voids by using a 3D lithography method and applying it to a vibration energy ...

This paper proposes a bimorph piezoelectric vibration energy harvester (PVEH) with a flexible 3D meshed-core elastic layer for improving the output power while lowering the resonance frequency. Owing to the high void ratio of the 3D meshed-core structure, the bending stiffness of the cantilever can be lowered. Thus, the deflection of the harvester and the strain in the piezoelectric layer increase. According to vibration tests, the resonance frequency is 15.8% lower and the output power is 68% higher than in the conventional solid-core PVEH. Compared to the solid-core PVEH, the proposed meshed-core PVEH (10 mm × 20 mm × 280 μm) has 1.3 times larger tip deflection and the maximum output power is 24.6 μW under resonance condition at 18.7 Hz and 0.2G acceleration. Hence it can be used as a power supply for low-power-consumption sensor nodes in wireless sensor networks.

Bimorph piezoelectric vibration energy harvester with flexible 3D meshed-core structure for low frequency vibration.

Culturing cellular tissues inside a microchannel using an artificial three-dimensional (3D) microstructure is normally conducted to elucidate and reproduce a biological function. The thick photoresist SU-8, which has a microscale resolution and high aspect ratio, is widely used for the fabrication of microchannels and scaffolds having 3D structures for cell culture. However, it is difficult to accurately fabricate a mesh structure with a pore size that is smaller than the cells that has an overall height greater than 50 μm because of the deterioration of the verticality of exposure light and the diffusion of acid, which accelerates the crosslinking reaction in the SU-8 layer. In this study, we propose a method of integrating a vertical porous membrane into a microchannel. The resolution of the vertical porous membrane becomes more accurate through inclined oxygen ashing, without degrading the robustness. Because a single mask pattern is required for the proposed method, assembly error is not generated using the assembly-free process. The fabricated vertical porous membrane in the microchannel contained micropores that were smaller than the cells and sufficiently robust for a microfluidic system. HepG2 cells were attached three-dimensionally on the fabricated vertical porous membrane to demonstrate 3D cell culture.

Integration Method of Microchannel and Vertical Micromesh Structure for Three-Dimensional Cell Culture Using Inclined Exposure and Inclined Oxygen Ashing.

Article	Year
Bimorph piezoelectric vibration energy harvester with flexible 3D meshed-core structure for low frequency vibration. Science and technology of advanced materials\| PubMed ID: 30275914	2018
Integration Method of Microchannel and Vertical Micromesh Structure for Three-Dimensional Cell Culture Using Inclined Exposure and Inclined Oxygen Ashing. Micromachines\| PubMed ID: 30572685	2018

Kou Yamada

Biography

JoVE Journal Publications

Other Publications