plasma-polishing-as-new-polishing-option-to-reduce-surface-roughness

Plasma Polishing as a New Polishing Option to Reduce the Surface Roughness of Porous Titanium Alloy for 3D Printing

Porous titanium alloy implants with simulated trabecular bone fabricated by 3D printing technology have broad prospects. However, due to the fact that ...

To explore a new method for finite element modeling to achieve material property assignment based on in situ CT gray value in simulated osteotomies for deformities.

[Finite element modeling of material property assignment based on CT gray value and its application in simulation of osteotomy for deformities].

Intraarticular calcaneal fractures can result in poor prognosis. Although operative fixation can improve the functional outcomes in most cases, surgical complications such as loss of reduction and wound healing problems may increase the risk of reoperation. Hence, this study aimed to design calcaneal locking plate with a lower profile and better biomechanical performance   and to compare the redesigned plate with the traditional calcaneal plate via the finite element method. A Sanders' type II-C intraarticular calcaneal fracture was simulated. Two fixation models utilising the branch-like calcaneal locking plate and the full plate were constructed. Topology optimisation was conducted to generate a new calcaneal plate design. A biomechanical comparison among the three groups of plates was performed using the finite element method. For the fracture simulated in this study, the optimised plate was superior to the traditional plate in terms of fixation stability and safety but was reduced in volume by approximately 12.34%. In addition, more rational stress distributions were observed in the redesigned plate, underscoring the superiority of this new design in terms of fatigue strength. These results demonstrate that the topology optimisation can be used to design a new implant with a minimised profile and no loss of fixation stability.

Biomechanical comparison of conventional and optimised locking plates for the fixation of intraarticular calcaneal fractures: a finite element analysis.

Additive manufacturing (AM) technology has helped to achieve several advances in the medical field, particularly as far as fabrication of implants is concerned. But the application of direct metal laser sintering (DMLS) bone plate is quite limited due to the indeterminate mechanical property. The purposes of this study were to characterize the biomechanical properties of the polished DMLS reconstruction plate and to compare these with the properties of commonly applied implants and to find whether the mechanical performance of DMLS plate meets the requirements for clinical application.

Comparison of conventional reconstruction plate versus direct metal laser sintering plate: an in vitro mechanical characteristics study.

To explore the mechanical mechanism and provide preoperative planning basis for transtrochanteric rotational osteotomy (TRO) procedure, a joint-preserving procedure for osteonecrosis of the femoral head. Eleven TRO finite element femurs with the most common types of necrosis were analyzed under multi-loading conditions. Thereafter, we made a comprehensive evaluation by considering the anatomy characters, daily activities, and risk indicators contain necrosis expansion trend, necrotic blood supply pressure, and the risk of fracture. The risk of fracture (ROF) is the lowest when standing on feet and increases gradually during normal walking and walking upstairs and downstairs. Compared with posterior rotation, rotating forward keeps more elements at low risk. Additionally, the correlation analysis shows it has a strong negative correlation (R = 0.834) with the average modulus of the roof. TRO finally decreased the stress and energy effectively. However, the stress and strain energy arise when rotated posteriorly less than 120°. The comprehensive evaluation observed that rotating forward 90°could reduce the total risks to 64%. TRO is an effective technique to prevent collapse. For the anterior and superior large necrosis, we recommend to rotate forward 60° to 90° (more efficient) or backward 180°. The methodology followed in this study could provide accurate and personalize preoperative planning. Graphical Abstract A proximal femur was reconstructed and modified using Mimics from a series of computed tomography. The models were meshed after solidified and performed different osteotomy, and then assigned material based on the Hounsfield Unit from CT images. Finally, 44 different TRO finite element femurs were analyzed under multi-loading conditions and evaluated comprehensively.

The effect of rotational degree and routine activity on the risk of collapse in transtrochanteric rotational osteotomy for osteonecrosis of the femoral head-a finite element analysis.

With the emerging concerns for more flexible and less stiff bridge constructs in the interest of stimulating bone healing, the technique of far cortical locking has been designed to reduce the stiffness of locked plating (LP) constructs while retaining construct strength. This study utilized simulation with diaphyseal bridge plating biomechanical models to investigate whether far cortical locking causes larger screw fracture risk than LP during rehabilitation. The fracture risk of the screws in the far cortical locking constructs increases in the non-osteoporotic and osteoporotic diaphysis compared with the screws in the LP constructs.

Biomechanical assessment of screw safety between far cortical locking and locked plating constructs.

 To compare the mechanical parameters and trajectory while operating the oblique pulling manipulation and the cervical rotation-traction manipulation.  An experimental research measuring kinematics parameter and recording motion trajectories of two cervical manipulations were carried out. A total of 48 healthy volunteers participated in this study, who were randomly divided into two groups of 24 representing each of the two manipulations. A clinician performed two manipulations in two groups separately. A motion capture system was used to monitor and analyze kinematics parameters during the operation.  The two cervical manipulations have similar thrust time, displacement, mean velocity, max velocity, and max acceleration. There were no significant differences in active and passive amplitudes between the two cervical rotation manipulations. The thrust amplitudes of the oblique pulling manipulation and the cervical rotation-traction manipulation were 5.735 ± 3.041° and 2.142 ± 1.742°, respectively. The thrust amplitudes of the oblique pulling manipulation was significantly greater than that of the cervical rotation-traction manipulation ( < 0.001).  Compared with the oblique pulling manipulation, the cervical rotation-traction manipulation has a less thrust amplitudes.

Mechanical Parameters and Trajectory of Two Chinese Cervical Manipulations Compared by a Motion Capture System.

The treatment of fractures of the distal tibia can be problematic due to the insubstantial soft-tissue covering this part of the anatomy. This study investigates a novel strategy for minimally invasive plate osteosynthesis of distal tibia fractures called bionic lightweight design plating. Following the structure of the animal trabecular bone, we utilized topological mathematical methods to redesign the material layout of the internal fixation device to fulfill the desired lightweight design within given boundary conditions. The results showed that this method can maintain the same stability of the construct as the original plate after a reduction in the original volume by 30%, and the differences in strain energy of plates and maximum node displacement of constructs between the constructs [RP construct  LP construct] were not statistically significant ( > 0.05). In the safety assessment of the constructs, the peak stress of plates between constructs was found to not be statistically significantly different under a doubled physiological load ( > 0.05). The average stress of the plates' elements exceeding the allowable stress was analyzed, and no statistically significant differences were found between the two constructs under axial compression stress conditions ( > 0.05). The average stress of the plates' elements in the redesigned plating construct under torsional stress conditions was 3.08% less than that of the locked plating construct ( < 0.05). Under the double physiological load condition, 89% of the elements of the plate in the redesigned plating construct and 85% of the elements of the plate in the locked plating construct were lower than the maximum safe stress of the plate, which was 410 MPa (secondary allowable stresses). That reminds us the topology optimization offer a possible way to improve the capacity of soft tissue protection while ensuring the safety of the RP construct by reducing the volume of the implants.

Optimal Design and Biomechanical Analysis of a Biomimetic Lightweight Design Plate for Distal Tibial Fractures: A Finite Element Analysis.

In the interests of more flexible and less stiff bridge constructs to stimulate bone healing, the technique of far cortical locking has been designed to improve locked plating constructs in terms of stress concentration, stress shielding, and inhibition of issues around fracture healing. However, far cortical locking screws currently lack objective designs and anti-fatigue designs. This study investigates an optimization algorithm to form a special locking screw composed of various metals, which can theoretically achieve the maintenance of the excellent mechanical properties of far cortical locking constructs in terms of fracture internal fixation, while maintaining the biomechanical safety and fatigue resistance of the structure. The numerical results of our study indicate that the maximum von Mises stress of the optimized construct is less than the allowable stress of the material under each working condition while still achieving sufficient parallel interfragmentary motion. Numerical analysis of high cycle fatigue indicates that the optimized construct increases the safety factor to five. A high cycle fatigue test and defect analysis indicates that the sandwich locking constructs have better fatigue resistance. We conclude that the sandwich locking construct theoretically maintains its biomechanical safety and fatigue resistance while also maintaining excellent mechanical properties for fracture internal fixation.

Article	Year
[Finite element modeling of material property assignment based on CT gray value and its application in simulation of osteotomy for deformities]. Nan fang yi ke da xue xue bao = Journal of Southern Medical University\| PubMed ID: 27435780	2016
Biomechanical comparison of conventional and optimised locking plates for the fixation of intraarticular calcaneal fractures: a finite element analysis. Computer methods in biomechanics and biomedical engineering\| PubMed ID: 28768423	2017
Comparison of conventional reconstruction plate versus direct metal laser sintering plate: an in vitro mechanical characteristics study. Journal of orthopaedic surgery and research\| PubMed ID: 28865455	2017
The effect of rotational degree and routine activity on the risk of collapse in transtrochanteric rotational osteotomy for osteonecrosis of the femoral head-a finite element analysis. Medical & biological engineering & computing\| PubMed ID: 32016806	2020
Biomechanical assessment of screw safety between far cortical locking and locked plating constructs. Computer methods in biomechanics and biomedical engineering\| PubMed ID: 33215954	2021
Mechanical Parameters and Trajectory of Two Chinese Cervical Manipulations Compared by a Motion Capture System. Frontiers in bioengineering and biotechnology\| PubMed ID: 34381767	2021
Optimal Design and Biomechanical Analysis of a Biomimetic Lightweight Design Plate for Distal Tibial Fractures: A Finite Element Analysis. Frontiers in bioengineering and biotechnology\| PubMed ID: 35265599	2022
Optimal design and biomechanical analysis of sandwich composite metal locking screws for far cortical locking constructs. Frontiers in bioengineering and biotechnology\| PubMed ID: 36237212	2022

Yuping Deng

Biography

JoVE Journal Publications

Other Publications